Connect-Tek Transa PRO 17 Bedienerhandbuch PDF herunterladen (Seite 114)

5.2 ection 4.2.2.6.3)

5.2 section 4.2.2.6.4)

Digital

.3.8. Input Type (s

Select Frequency.

.3.9. Min Freq (

Min frequency = 0.100

Output 1 Setup (Over speed alarm)

.3.10. Source (section 4.2.4.1)

Navigate back to Digital Output 1 setup. Select Input A for source.

5.2

5.2 ion 4.2.4.2.1)

.2.4.2.2)

.4.1)

being used to ensure that the speed does not exceed 400 rpm.

Digital

.3.11. Latch Mode (sect

Select Off

5.2.3.12. On / Off Delay (section 4

No delay is desired. Enter 0.00 for both.

5.2.3.13. Output Switching (section 4.2.4

Digital 1 is

• Select EA (energize above)

• Enter 4.000e+2 for the Alarm setpoint.

• Enter 3.500e+2 for the Safe setpoin

Output 2 Setup

Navigate to Digital Output 2 setup. Make all constants the same except for Output

switching.

5.2.3.14.

he speed does not drop below 300

Select EB (energize below)

oint.

Relay Output 1 Setup (Failsafe Overspeed alarm)

Output Switching (section 4.2.4.4.2)

Digital 1 is being used to ensure that t

rpm.

•

• Enter +3.000e+2 for the Alarm setpoint

• Enter 3.500e+2 for the Safe setp

Relay Output 1 setup. Select Input A for source.

5.2.3.15. Source (section 4.2.4.1)

Navigate back to

5.2.3.16. Latch Mode (section 4.2.4.2.1)

Select Off

102

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 132 133

Kommentare zu diesen Handbüchern

Keine Kommentare

Connect-Tek Transa PRO 17 Bedienerhandbuch Seite 114

Kommentare zu diesen Handbüchern