Connect-Tek USB-16 Bedienungsanleitung PDF herunterladen (Seite 13)

Host High Speed Electrical Test Procedure Revision 1.4

9. Press the icon. Verify that the oscilloscope display is NOT reporting “clipping”. If it is,

adjust the vertical amplitude until the “clipping” message does not appear. Do not press OK

until the correct waveform is displayed.

10. Press OK when the correct waveform is acquired. Press OK when done.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Keine Kommentare

Connect-Tek USB-16 Bedienungsanleitung Seite 13