Connect-Tek Transa PRO 17 Bedienungshandbuch PDF herunterladen (Seite 24)

The emergency buttons are active in all security levels. The system recognizes

the emergency buttons as sensors (see Table 5).

■ To activate a police, fire, or auxiliary/medical alarm

from the panel:

Press and hold both emergency buttons at the same time, for at least 3 seconds.

or– Press both emergency buttons twice within 3 seconds.

or– Press

COMMAND

, then immediately press both emergency buttons at the

same time.

The interior and exterior sirens and the panel sound the appropriate alarm. Exte-

rior sirens do not sound for auxiliary/medical alarms.

■

To activate a police or auxiliary/medical alarm from a

Handheld Touchpad:

Press and hold the appropriate emergency button for at least 3 seconds.

The interior and exterior sirens and the panel sound the appropriate alarm. Exte-

rior sirens do not sound for auxiliary/medical alarms.

NOTE: The Handheld Touchpad only has a POLICE emergency

button.

■ To activate an alarm from a Keychain Touchpad:

Simultaneously press the Arm and Disarm buttons until the light blinks to acti-

vate an alarm type set by your security consultant.

The interior and exterior sirens and the panel sound the appropriate alarm. Exte-

rior sirens do not sound for auxiliary/medical alarms.

■

To cancel a police, fire, or auxiliary/medical alarm:

Enter

ACCESS CODE + 1

from the panel or a touchpad. Sirens are silenced, and

the panel announces,

Sensor [sensor #] [alarm type] Alarm memory, Alarm

system is OFF. See Table 5 for the appropriate sensor number.

Table 5

. Emergency Button Sensor Numbers

Emergency

Button

Sensor Number

POLICE 81

FIRE 80

AUXILIARY 82

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 60 61

Keine Kommentare

Connect-Tek Transa PRO 17 Bedienungshandbuch Seite 24