Connect-Tek Transa PRO 17 Bedienungshandbuch PDF herunterladen (Seite 35)

■ To turn controlled lights on or off from a Keychain Touchpad:

Press the Light button and hold until the light blinks.

The Panel announces,

On or Off. Controlled lights turn on or off, depending on the

current setting.

Checking the System Status (STATUS)

Whenever you disarm the system or experience system problems, check the system’s sta-

tus. The panel may notify you of the following conditions:

Sensors that are open or have covers off

Sensors with low batteries

Sensors that are bypassed

Condition of AC power

Condition of backup batteries

Sensor alarms that occurred during the arming period

Sensors experiencing communication failure

■

To check system status:

Press

STATUS.

The panel and interior sirens sound the appropriate number of arming level beeps for

the current security level, and the panel announces the status of the system.

NOTE: If a sensor is open, the system announces the open sensor number

instead of announcing the complete system status. The status of

the system battery and AC power are announced only if there is a

failure.

STATUS

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 60 61

Keine Kommentare

Connect-Tek Transa PRO 17 Bedienungshandbuch Seite 35