Connect-Tek Transa PRO 17 Bedienungshandbuch PDF herunterladen (Seite 39)

SECTION 5–

MAINTAINING YOUR SYSTEM

Follow these maintenance procedures to help keep your system reliable and trouble-free.

Required System Tests

It is important that you check the system status and perform phone and sensor tests

weekly. These procedures ensure that your system is fully operational.

■

To check system status:

With all sensors in their normally secure position, press

STATUS.

The panel and interior sirens sound arming level beeps, corresponding to the current

arming level. The panel announces system status, as shown in Table 8.

NOTE: If a sensor is open, the system announces only the open sensor

number. The status of the backup battery and AC power are

announced only if there is a problem.

■ To perform a phone test:

NOTE: Performing a phone test is only necessary if your security system is

monitored by a monitoring service.

Table 8

. Voice Status Messages

Main Message Status Level

Alarm System is

OFF —

ON Level 2

ON Level 3

System Battery

is OK. —

Failure

†

—

AC Power

is OK. —

Failure

‡

—

†

See "Replacing Panel Backup Batteries" on page 41.

‡

Check if the AC power transformer is plugged in. Check the cir-

cuit breaker or fuse controlling the outlet. If you still don’t have

AC power, contact your security consultant.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 60 61

Keine Kommentare

Connect-Tek Transa PRO 17 Bedienungshandbuch Seite 39